Eastman Talon 25x™ Cutting System
The Eastman Talon 25x™ is engineered and manufactured in the USA to automatically pull stacked material plies from the spreading table to a modular, bristle-block conveyor bed for reciprocating knife cutting of patterns. Precise system operations with state-of-the-art motion control communications offer an industrial-strength solution for cutting up to 3cm of compressed material goods.
The Talon has been engineered to meet the demands of clients in growing market segments like industrial fabrics and composites industries; customers cutting traditional -as well as- modern technical materials like kevlar, fiberglass, nonwoven polyesters, foam-backed vinyl and other industrial fabrics.
Other Standard Features
|Cutting Area Width||78 inches. (2.0m) Please contact the iSpecc for active cutting zone dimensions. Custom widths available.|
|Cutting Area Length||5.5 Feet. (1.68m) Please contact the iSpecc for active cutting zone dimensions. Custom lengths available.|
|Electric-control power/PC||230V, 3 ph, 50/60 Hz, 30 amps|
|Electric-vacuum blower||208/230/380/460V, 3 ph, 50/60 Hz, 7.5 HP, VFD control optional|
|Power: Pneumatic||90 psi (6.2 bar) 18 CFM|
|Maximum Cutter Speed||Up to 60 in./sec (152.4cm/second) – material dependent|
|Maximum Conveyor Speed||8 in/sec (20.3cm/min|
|Maximum Thickness of Compressed Material||1.18 in / 3cm|
|Drive Chain||Dual-X Axis, Y-Axis & Theta Axis.
X-Axis Rack & Pinion Drive, Y-Axis Belt Drive
Brushless Servo motors
|Sound level||< 76 db(A)|
|Operating temperature||55 – 100°F (12 – 37°C)|
|Humidity||20 – 80% (non-condensing)|
|Disclaimer||Achievable speeds and accelerations are tool, material and thickness dependent. All indicated speeds, dimensions, weights and performance data are approximate and subject to change without notice.|