Eastman Eagle C125 Conveyor System
The Eastman Eagle C125 conveyor system boasts supreme capabilities for single- to low-ply cutting requirements. It has the ability to continuously convey rolled material goods with consistent speed and control. Eastman’s gantry and tool head design are engineered to cut the most diverse technical and industrial fabrics available, while exceeding industry standards for accuracy.
The robust conveyor design delivers unrivaled levels of material utilization and is often capable of cutting multiple layers without plastic overlay. This computer-controlled cutting system requires minimal operator guidance to automatically feed and spread material to the identified start position.
- Exclusive InMotion™ software enables the conveyor to continuously move while the gantry is cutting (option)
- Tremendous efficiency for pattern pieces exceeding the table length
- Choice of 60 blades, punches and notches
The cutting surface is a smooth and durable, high-durometer cast urethane conveyor belt suitable for even sticky or downy materials. It has proven reliable for 2,000+ hours of normal operation, with some customers testifying to more than four years of continuous use.
The C125 is equipped with a self-contained, high-flow vacuum system to ensure optimum material hold-down for cutting. Millions of holes are perforated in a random pattern that provides evenly dispersed vacuum flow, no matter where you are cutting. The piece removal zone is integrated into the design, eliminating the need for extension tabling.
Made to Order
Available in a range of widths, lengths and various tool head accessory options, the C125 will be built to match your application needs, allowing you to customize the tools and capabilities to maximize productivity.
International Compliance Ratings
The operating computer, and control cabinet are housed in independent enclosures that are sealed to offer dust and water resistant protection in harsh or high particulate environments. Additionally, cabling connectors, servo motors and display components meet recognized international protection ratings requirements.
Industrial Design for Rigorous Use
- Advanced electro-pneumatic regulator for precise tool pressure control
- Heavy-duty cable connectors
- Hi/Low voltage systematic panel layout for easy troubleshooting
- Easy access, sealed doors for inspection and maintenance
- Heavy-gauge steel construction with scratch-resistant powder coated finish
|Width||78 in. (1.98 m) 96 in. (2.44 m) 108 in. (2.74 m) 114 in. (2.90 m) 126 in. (3.20 m) 156 in. (3.96 m) Please contact the factory for active cutting zone dimensions. Custom widths available.|
|Length||16 ft. (4.88m) 20 ft. (6.10m) 36 ft. (10.97m) Please contact the factory for active cutting zone dimensions. Custom lengths available.|
|Drive system||Dual-X Axis, Y-Axis & Theta Axis. X & Y-Axis Rack & Pinion Drive, Brushless Servo Motors.|
|Electric-control power/PC||230V, 3 ph, 50/60 Hz, 5.4 kVA. Stand-alone step-down transformer required for other voltages.|
|Electric-vacuum blower||208/230/380/460V, 3 ph, 50/60 Hz, 10 HP, VFD control.|
|Power: Pneumatic||75 – 90 psi at 15 SCFM (5.17 – 6.2 bars at 0.42 cmm)|
|Maximum cutting speed||60 inches/second (152.4cm/second)|
|Maximum conveyor speed||11 inches/second (28cm/second) System size dependent.|
|Maximum X/Y speed||60 inches/second|
|Compressed air consumption||15 cfm|
|Sound level||< 76 db(A)|
|Operating temperature||55 – 100°F (12 – 37°C)|
|Humidity||20 – 80% (non-condensing)|
|Disclaimer||Achievable speeds and accelerations are tool, material and thickness dependent. All indicated speeds, dimensions, weights and performance data are approximate and subject to change without notice.|