Eastman Eagle S125 Static Table Cutting System
Eastman’s static table system is capable of cutting, marking and punching virtually any flexible material at speeds of up to 60 inches per second (152.4 cm/sec.). The static cutting table has proven itself as the go-to resource for materials like cotton, nylon and vinyl as well as difficult-to-cut materials—such as polystrand, p-tex, and fiberglass-polyester blends. The static table system is available in a range of system lengths and widths to meet the demands for prototypes, one-offs and full-production runs. The system’s high-precision configuration features multi-axis motion for more defined and accurate cuts. Material is spread across the static table by an operator or with the use of a pneumatic gripper bar. The open plenum vacuum system design ensures evenly dispersed airflow for optimal material hold-down. This computer-controlled system features zoning capabilities to enable cutting in one area while the operator is simultaneously picking parts in another, maximizing daily production capacity.
- Choice of standard, heavy-duty or fiber tool head, featuring individually aligned and calibrated tool spindles with your choice of over 60 blades, punches and notches.
- A library feature within the operating control software allows the operator to save commonly used tool pressures and blade assignments based on job and material files.
- Prevent unauthorized changes to the system and software with restricted login access.
The standard cutting surface is a porous plastic sheet. Alternative cutting surfaces are available to optimize cutting results for any given material or aid in controlling material contamination concerns. Proven reliable for 2,000+ hours of normal operation use.
The S125 is equipped with a high-flow vacuum system to ensure optimum material hold-down for cutting. The porous surface ensures evenly dispersed vacuum flow, no matter where you are cutting. Cutting zones may be designated so that cutting occurs in one area while piece removal takes place in another.
International Compliance Ratings
The operating computer and control cabinet are housed in an ergonomic enclosure that can be sealed to offer dust and water resistant protection in harsh or high particulate environments. Additionally, cabling connectors, servo motors and display components meet recognized international protection ratings requirements.
Made to Order
Available in a range of widths, lengths and various tool head accessory options, the S125 will be built to match your application needs, allowing you to customize the tools and capabilities to maximize productivity.
Industrial Design for Rigorous Use
- Advanced electro-pneumatic regulator for precise tool pressure control
- Heavy-duty cable connectors
- Easy access, sealed doors for inspection and maintenance
- Heavy-gauge steel construction with scratch-resistant powder coated finish
- Four remote emergency stops: two on cutting gantry, two system-mounted Additional gantry-mounted stop disks pause system operation until returned to neutral and reset.
- Operation can then be resumed from any position
- Tool head is equipped with plexiglass safety window to keep hands free of knife during operation
- Single turn-off point with a universal power system for lockout/tagout safeguards employees from unexpected start-up
|Width||54 in. (1.37m) 60 in. (1.54m) 72 in. (1.82m) 78 in. (1.98 m) 96 in. (2.44 m) 108 in. (2.74 m) 114 in. (2.90 m) 126 in. (3.20 m) 156 in. (3.96 m)+ Please contact the factory for active cutting zone dimensions. Custom widths available, please contact us for more information.|
|Length||8 ft. (2.44m) 12 ft. (3.66m) 16 ft. (4.88m) 20 ft. (6.10m) 36 ft. (10.97m)+ Please contact the factory for active cutting zone dimensions. Custom lengths available, please contact us for more information.|
|Drive system||Dual-X Axis, Y-Axis & Theta Axis. X & Y-Axis Rack & Pinion Drive, Brushless Servo Motors|
|Electric-control power/PC||230V, 3 ph, 50/60 Hz, 5.4 kVA. Stand-alone step-down/up transformer required for other voltages.|
|Electric-vacuum blower||208/230/380/460V, 3 ph, 50/60 Hz, 7.5 HP, VFD control optional|
|Power: Pneumatic||75 – 90 psi at 15 SCFM (5.17 – 6.2 bars at 0.42cmm)|
|Maximum cutting speed||60 inches/second (152.4cm/second)|
|Maximum X/Y speed||60 inches/second|
|Compressed air consumption||15 cfm|
|Sound level||< 76 db(A)|
|Operating temperature||55 – 100°F (12 – 37°C)|
|Humidity||20 – 80% (non-condensing)|
|Disclaimer||Achievable speeds and accelerations are tool, material and thickness dependent. All indicated speeds, dimensions, weights and performance data are approximate and subject to change without notice.|